Project number: (10022) V0038

Customer:

Schenck Motorama Inc. – System Integrator

General Motor Corporation – End User

Application description:

Adjustable work platform is used for production assembly of component parts to vehicles

This adjustable work platform utilizes two Herkules direct lifting scissor lift tables. A hand control mounted on the hand railing allows the operator to manually adjust the height of the scissor lift tables to the desired work height. The lift can be lowered to a height of 21 inches (533 mm) or raised to a height of 46 inches (1168 mm). The lifts are placed on two independent risers which are 12.5 inches (318 mm) tall. The overall length of the platform is 216 inches (5486 mm) with the width being 54 inches (1371 mm).

Operator Lift Safety Features

The hand railing was welded in place and manufactured to meet all Occupation Health and Safety Standards (OSHA). The hand railing height was reduced at one end to allow for clearance for the vehicle axles. The adjustable work platform has toe kick around the full perimeter except for one end where the gate is located. One end of the adjustable work platform has a fixed height deck that is independent from the lift system. This fixed height deck has steps on each side which are used to enter the adjustable work platform. A chain gate is used for safety when the lift system is in the raised position. The hand railing, chain gate and toe kick help to keep the operator safe and allows the operator to focus on the job and not be concerned about stepping in the wrong place which could lead to an injury.

The adjustable work platform risers and fixed platform are equipped with 12 quantity floor anchor holes to lag the system to the floor.

Additional information:

Part number: LOSA-30-46-54216

Project description: Operator Lift System

Capacity: 3000 pounds (1361 kg)

Additional features:

Full parameter hand railing, toe kick, chain gate, and independent deck with steps